mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

General 43.3 Subdivision of Compressed Air Brake Systems I Compressed air brake system Hydraulic Brake System . Single-Circuit Brake System Dual-Circuit Brake System Compressed air brake booster X X Compressed air control for single-circuit trailer brake system - Compressed air control for dual-circuit trailer brake system x x Compressed air control for single- and dual-circuit trailer brake system Operation Compressed Air Generation System Single-Circuit Compressed Air Brake System The fresh air drawn through the oil bath air cleaner of the engine is compressed in the air compressor and flows to the pressure regulator with air cleaner and tire inflation connection.

There, the compressed air supplied is cleaned and the operational guage pres sure automatically monitored. When the specified max. operating overpressure is attained, the air compressor is switched to idling, and when compres sed air is drawn from the pressure tank, to charging. The compressed air supplied flows from the pressure regulator into the compressed air tank, in front of which a defroster unit or defroster pump is installed optionally. The dual pressure gauge white needle indicates the gauge pressure in the tank. This brake system requires only one air line to the trailer. The trailer brake system is energized when the trailer brake line is bled.

During extended downhill runs, the compressed air supply in the trailer may become exhausted because no more air is supplied to the trailer during braking. Air gauge pressure: 5.2 bar. Dual-Circuit Compressed Air Brake System This brake system has two air lines to the trailer. The line from the reservoir of the tractor unit to the trailer reservoir is under pressure supply line. The second line leads to the control unit in the trailer and is pressureless brake line. Tractor Brake System From the compressed air tank the compressed air flows to the brake booster.

Simultaneously, compressed air flows to the air- controlled trailer control valve connection V and through this unit to the coupling head. The trailer brake is energized by charging the brake line with air. The control unit of the trailer connects the reservoir to the brake cylinders. When the trailer