mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

General 43.3 Fault Cause Remedy Trailer Control Valve, Dual-Line With service arid parking brakes Intake valve or sealing rings lea- Clean or exchange intake valve. released, compressed air esca- king. Exchange sealing rings. pes at vent. With service and parking brakes Diaphragm piston leaking. Exchange control valve. released, compressed air esca pes at vent of hydropneumatic control valve. Operating stage of valve is ex- Inner stiffness at valve pistons Check control valve, exchanging cessive or graduation is not sa- sticking. if necessary. tisfactory. Residual pressure left in trailer brake line. tions, compressed air escapes at leaking. ye. Exchange sealing rings.

At partial and full braking posi- Exhaust valve or sealing ring Clean or exchange exhaust val vent. Trailer Control Valve, Dual-Line With service and parking brakes Air brake servo unit is not ex- Check and adjust pedal play. released, residual pressure left hausting fully. Check air brake servo unit, ex in trailer control line, changing if necessary. Hydropneumatic control valve is Check hydropneumatic control not exhausting fully. valve, exchanging if necessary. Handbrake valve is not providing Check and adjust handbrake val full admission. ye setting. Check handbrake val ve, exchanging if necessary.

With parking brake applied, com- Exhaust valve or sealing ring Clean or exchange exhaust val pressed air escapes at vent, leaking. ye. Exchange sealing rings. Control valve of single-line bra- Check single-line trailer control ke system is leaking toward trailer control valve, exchanging control port. if necessary. Two-Way Valve Compressed air escapes at un- Piston slide leaking. Exchange piston slide. controlled delivery port line.