mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

General 43.3 Fault Cause Remedy 3/2-Way Valve actuating valve At released position, compres- Valve leaking. Clean or exchange valve. sed air escapes at vent. At actuating position, compres- Valves or sealing rings defecti- Clean valves, exchanging if ne sed air steadily escapes at vent, ye. cessary. Actuating tappet does not fully Spring defective, tappet sticking. Check valves, exchanging if ne return to released position. cessary. 3/2-Way Valve testing valve With handbrake released, corn- Sealing ring on tappet at top is Exchange sealing ring or valve. pressed air escapes at rotary leaking. knob. Handbrake exhausts. Testing Seal on tappet in centre is lea- Exchange seal or valve.

valve adrnits. At the same time, king. compressed air steadily escapes at handbrake valve vent. Handbrake exhausts. At same ti- Sealing ring on tappet at bottom Exchange sealing ring or valve. me, compressed air steadily es- is leaking. capes at handbrake valve vent.