mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

Control Equipment 43.3 Brake Booster Part No. Westinghouse Designation 462 007 01 2 0 462 007 042 0 000431 4614 000431 7414 optio nal I Stage 1 II Stage 2 A Outlet, control line M Outlet, control line V Inlet, supply 4 2 Control valve 3 Plunger tor master brake cylinder 4 Breather 5 Control gap 1 Brake pedal pressure 3 Brake Booster Diagram Technical Data The pressure increase in chamber of stage 1 contI nues toward outlet A where the control line to changeover valve is connected to the end of the frame more recently 3/2-way valve. If valve is closed, second stage M does not receive any overpressure via return line and remains ineffective, Operating pressure max.

0.8 bar Response pressure 0.4 bar Volume of chambers I and II at max. stroke 0.6 I i.e. the pulling vehicle is braked with less overpressu re than the trailer. Piston stroke 42mm If the valve is not closed, the overpressure increase Piston dia. 145mm will also energize the second stage. Thread connection M 18 x 1.5 - 15 deep When the brake pedal pressure reduces, spring 6 pushes both piston members back into no-load position and the compressed air escapes from stage 2 via control line M-A and gap at 5 and 2 via breather bore 4 into the atmosphere.