mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

43.3 Control Equipment Handbrake Valve Dual-Line Part No. Westinghouse Designation 461 702 001 0 0004303081 Technical Data 1 Operating pressure max. 8.0 bar Nominal width 12 mm 0 1 13 mm2 Thread connection M 22 x 1 .5 - 1 2 deep 3 UZ 43-0025 Installation Instructions 1 Connection, compressed air tank 2 Connection, relay valve or trailer brake line 3 Bleed hole 4 Valve rod 5 Intake valve 6 Lever 7 Outlet valve Valve is installed in brake line toward relay valve as through valve and connected to handbrake linkage. Disassembly, Inspection and Assembly 1 Clean valve externally P 3 solution, compressed air. 2 Clamp valve in vice handbrake lever up.

3 Unscrew check nut and hexagon nut and remove lever. 4 Change position of valve in vice. 5 Unscrew cap. 6 Pull out with rod with compression spring large, valve, piston and compression spring small.