mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

__________________________________________________________________ Control Equipment 43.3 Handbrake Valve Dual-Line Part No. Westinghouse Designation 461 7040250 000431 0216 Technical Data Transmitted pressure max. 4.5 0.5 bar Operating pressure max. 7.5 bar Nominal width 8 mm Thread connection M 22 x 1.5 - 12 deep Installation Instructions 1 Hand ever 2 Upper thrust piece 3 Lower thrust piece 4 Compression spring 5 Bore 8 Piston 7 Outlet 8 Double cone valve 9 Inlet 10 Clamping piece a Chamber Handbrake valve is installed as a through-valve in brake line toward relay valve and is connected to handbrake linkage via a brake cylinder. Connections:

V Supply tank A Trailer line E Bleed hole A pipe or hose may be connected at connection E bleed hole to dissipate the air escaping when releasing the brake directly into the atmosphere to prevent any noise disturbance. Single-Chamber Brake Cylinder Piston Cylinder Part No. Westinghouse Designation 421 0020000 421 021 0000 000 420 52 24 000 420 70 24 Technical Data Westinghouse Designation Piston dia. mm Piston stroke mm Piston force in N at 6.0 bar 421 0020000 80 110 2450