Adjusting headlamps 82.1 Adjusting main headlamps 1 Check tyre pressure, adjust as required. 2 Park vehicle on even surface. 3 Make headlamp adjuster ready for service accor ding to instructions of the manufacturer. 4 Check headlamp adjustment. If headlamps requi re to be adjusted, vary height adjusting screw 1 or side adjusting screw 2 appropriately. 5 If no headlamp adjuster is available, place vehicle on an even surface 5 m distance from a vertical wall or other test surface. Position central and adjusting marks with division mark according to legend on wall test surface.
H Height centre of headlamp h Height division mark e Adjustment 5 cm P Test surface S Standing surface Z Central mark E Adjusting mark T Division mark K Cutoff point 150 A Distance between centre of beams L Distance 5 m - test surface - headlamp 6 Switch on main beam and individually check headlamp adjustment. The centre of beams must lie on the central mark "7", adjust headlamps as required.