Lifting capacity of hydraulicly operated power lilt system as of chass. no. 411 .112.017 845 a Rear power lift system The lifting capacity of the power lift system is in the range of 470-525 mkp depending upon the swivel point. The capacity on the implement mounting points of the 3-point linkage at 550 mm connecting height and a middle hub spindel length of upper arm of 100 mm free thread: Center of gravity behind the swivel bearings m Lifting power kp Liftin height in center ot gravity mm* UL - front UL - rear UL - front UL - rear 1190 900 750 690 630 580 1350 1010 850 790 730 680 410 555 710 775 825 850 390 520 610 640 675 690 0 0.4 0.8 1.0 1.2 1.4 * The max.
travel in center of gravity under consideration of vehicle spring action and tire flattening. However, losses occouring in floating position while operating the vehicle are not taken into consideration. b Front power lift system Remark: UL = bottom arm Max. power at the most permissible piston 0 of the cylinder of 72 mm Pressure 6000 kp Pull 5000 kp Lifting capacity of pneumatic power lift system up to chass. no. 411.112.017 844 a Rear power lift arm at the following distance of mounted implement: Max. lifting capacity on the implement mounting points:
Center of gravity distance cm Lifting capacity kp Type 401* Type 411** 0 645 830 25 550 730 50 460 630 80 350 520 120 200 360 150 90 240 b Front po wer lift arm at 8.5 kp/cm2 operating pressure