mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

Adjusting Service Brake 42.3 Single-Circuit Drum Brake Adjustment Note: Adjust brakes individually at each side when brake drums are cold. 1 Unscrew back plate at bottom. 2 Jack up vehicle and release parking brake. 3 Turn adjuster 1 outward b until brake shoe contacts brake drum. 4 Turn adjuster 1 back a so that wheel just turns freely. 5 Press brake pedal several times, checking if wheels turn freely. 6 Adjust service brake at rear axle, referring to steps 2 to 5. 7 Attach back plate and lower vehicle. 8 Perform trial run. Note: Adjustment is correct if brake drums are still cool after a lengthy run without braking.