Komatsu — Komatsu PC308USLC-3E0 Hydraulic Excavator Operation & Maintenance Manual

. MAINTENANCE MAINTENANCE PROCEDURE door at the left side of the machine, remove 4 and down and to and is not at an and push it in 4 - 23 Replacing Elem 1. Open the re hooks (2), th 2. Hold the out er element (5), rock it lightly u the left and ri ght, and rotate the element to pull it out. Do not remo ve inner element (6) when doi 3. When the ou ter element (5) has been remo inner elemen angle. If is i straight. 4. Wipe off or b rush off the dirt stuck to cover ( the air clean 5. Remove any dirt or dust that is accumulated (4) installed t NOTICE The inner eleme nt must not be cleaned and used again. When replacing the outer element, re place the inner element at the same time.

If the inner elem ent is not installed properly and the outer element and cove r areinstalled, there is danger that the outer element will be damaged . The seal portion on imitation parts lacks precision , and allows the entry o f dust, which leads to damage of the engine. Do not use such imitati on parts. 6. Remove inne r element (6), then quickly ins Insert the inn er element securely so that it 7. Push the ne w outer element (5) in straight with your hand when installing it to the a If the elemen t is held and rocked lightly up a nd down and to the le ft and right while pu shing it in, the element can be inserted e