. MAINTENANCE MAINTENANCE PROCEDURE REMARK CHANGE OIL IN SWING MACHINERY CASE WARNING the engine is may cause serious burns. Wait for tighten the drain valve again. 4 - 59 Operate the machine a fter halting for more than 5 minutes t o eliminate bubbles in the oil in 12. Check for oil leaka ge and wipe off any spille Parts emperature to go down b efore performing this operat stopped and he oi Refill capacity: 8.2 li ters (2.17 US gal) under the machine and put a container P) to catch the drained oil. e (P) under the body, drain the oil, then 1. Remove cover (1) under drain valve ( P) to catch the drained oil 2. Loosen drain valv 3.
Remove the cap of oil filler (F), then add the replacement gh oil filler (F). amount of oil throu 4. Pull out dipstick (G ) and wipe off oil on the d ipstick with cloth. 5. Fully insert dipstick (G) into filler pipe, then r emove it. 6. The oil level should be between H and L mar ks on the d ipstick (G). If the oil does not reach the L mark, add oil through o il filler port (F). 7. The oil level should be between H and L mar ks on the d ipstick (G). If the oil does n ot reach the L mark, add oil through o il filler port (F).