. MAINTENANCE MAINTENANCE PROCEDURE for CHECK NITROGEN GAS CHARGE PRESSURE IN ACCUMULATOR (return circuit, oil cooler outlet) 4 - 63 CHECK ALL TIGHTENING POINTS OF ENGINE EXHAUST PIPE CLAMPS Please ask y our Komatsu distributor to check the tightening of the clamps between the air cleaner - turbocharger - a ftercooler - engine. CHECK FAN BELT TENSION AND REPLACE FAN BEL Special tools are required for he fan inspection an d replacemen nspection and replaceme belt. Contact you Komatsu distributors REMARK A n installed a uto fan belt tension adjuster, "Auto Tensiona l Fan Belt", dispenses with the belt deflection adjustment.
A special too l is needed for inspecting and charging with nitrogen gas. Have your Ko matsu distributor inspect and charge the accumulator. CHECK NITROGEN GAS CHARGE PRESSURE IN ACCUMULATOR (for breaker) (If equipped) A special too l is needed for inspecting and charging with nitrogen gas. Have your Ko matsu distributor inspect and charge the accumulator.