. MAINTENANCE MAINTENANCE PROCEDURE CHECK FOR LOOSENESS OF HIGH-PRESSURE PIPING CLAMP, HARDENING OF RUBBER CHECK FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER 4 - 73 Chec k visually and touch by hand to check that there is no harde ning of the rubber and no loose bolts of the mounting clamps (2 places) for the high-pressurepiping between the supply pump and the common rail.
If there are any ask your Komatsu distributor to carry out The f uel spray prevention caps (14 places) on the fuel injection piping and both ends of the high-pressure piping act to prevent the fuel from coming into contact with high-temperature p arts of the engine and causing a fire if the fuel shou ld leak or spray out. Check visually and touch by hand to check that there are no missing caps, loose bolts or hardening of the rubber. If there are any problems, the parts mus Komatsu distributor to carry out replacement. t be replaced. In this case, please ask your