. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENT OPERATIONS WARNING WARNING The method of operating the attachment is as follows. When Using Breaker With the working mode set to B mode, insert the lock pin in front-only FREE position (b). Press the front of the pedal to operate the breaker. 6 - 16 If the pedal is operated when th e auto-deceleration is being actuated a nd the engine speed has dr opped, the engine spe ed will suddenly rise, so be careful wh en operating. If you leave your foot resting on the pedal and depress the pedal by mis take, there is danger that t he attachment may sud denly move and cause serious perso nal injury.
If you do not need to operat e the pedal, do not rest yo ur foot on the pedal. When the attachment is not be ing used, set the lock pin of the pedal to the LOCK position to p revent the pedal from being operated. If an A lock (attachment) (1) is installed and the bucket is brought i towards the cab, the bucket (2) ma y hit the cab. Be careful when operatin in this condition. . Set the working mode to B . If it is necessary to adjust the oil flow, see "Setting Oil Flow ( Precautions when using s at the FREE position. de is B mode. e oil, see "HYDRAULIC CIRCUIT (PAGE 6-8)". r it is necessary to install an accumulator for the attachment circuit, contact the nd then decide.
Check that the stop valve i Check that the working mo For details of the path of th e oil, see "HYDRAULIC CIRCUIT When considering whethe attachment manufacturer a For other precautions whe n handling the breaker, follow the i nstruction manual from t he breaker manufacturer and use the breaker correc tly. The deterioration of the hyd raulic oil when using the breaker is much faster than for nor mal operations, so re duce the maintenance interval fo r the hydraulic oil and element. LIC BREAKER (PAGE 4-17)". For details, see "MAINTEN ANCE INTERVAL FOR HYDRAU