. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT When Using General Attachment Such as Crusher the in the operation manual operating the cause overheating and other 6 - 17 With the working mode se t to P mode or E mode, set the lo to FREE position (c) for b front or rear of the pedal to . Set the working mode . If it is necessary to adj ust the oil flow, see "Setting Oil F Precautions when using Check that the stop val Check that the working For details of the path of the oil, see "HYDRAULIC CIRC UIT (PAGE 6-8)".
For other precautions related to the handling of attach ment, follow the provided by the attach ment manufacturer to operate the attachment correctly LONG TERM STORA GE If t he equipment is not to b e used for a long time, do as foll Set the stop valve in the LOCK condition. ngs to the valves. OCK position.
general attachment installed, op Install the plug and O-ri Set the lock pin at the L If pedal may SPECIFICATIONS Hydraulic specifications 25 x 2 liters / min valve relief setting pressure 27.47 MPa (280 kg/cm2, 3980 PSI)(except B mode) valve cracking pressure 24.53 MPa(250 kg/cm2, 3550 PSI)(except B mode) valve relief setting pressure 20.59 MPa (210 kg/cm2, 2980 PSI)(B mode) valve cracking pressure 17.20 MPa(175 kg/cm2, 2490 PSI)(B mode) safety valve relief set pressure of 24.53 MPa (250 kg/cm2, 3550 PSI) and relief valve Max.
merging oil flow 2 Safety valve of service valve relief setting pressure 27.47 MPa (280 k g/cm2 98 0 PSI)(exce Safety valve of service valve cracking pressure 24.53 M Pa(250 kg/cm 2, 3550 PSI)(except B mode) Safety valve of service valve relief setting pressure 20.59 MPa (210 k g/cm2 , 2 98 0 PSI)(B m ode) Safety valve of service valve cracking pressure 17.20 M Pa(175 kg/cm 2, 2490 PSI)(B mode) In addition, valves with a safety valve relief set pressure o f 24.53 MPa (250 kg/c m2, 3550 P valve cracking pressure of 20.11 MPa (205 kg/cm2, 2911 PSI) are a lso avilable s o please contact your K omatsu distributor.