Komatsu — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING METHOD OF TOWING MACHINE WARNING NOTICE 3 - 154 Serious injury or death could result if a disab led mac hine is towed incorrectly or if there is a mistake in the selection o r inspec tion of th e wire rope. Always check that the wire rope used for towing has am ple streng th for the weight of the mac hine being towed. Never use a wire rope which has cut strands (A) , reduce d diamet er (B), or kinks (C). There is danger that the rope may b reak du ring the t owing operation. loves when handling wire rope. on a slope.

Always wear leather g loves when handling wire Never tow a machine During the towing op eration, never stand betwe en the t owing ma chine and the machine bein g towed. Operate the machine s lowly and be careful not to apply a ny sudde n load to the wire rope. The max. allowable draw bar pull of this machine is 367,750 N (37,50 0 kg). Do not attempt to pull anyt If the machine is stu ck in mud and cannot e scape under its own power, or when tow ing a heavy object, fit wi re to th e towing hook as shown in the d iagram on the right, or if the machi ne is equipped with a cou nterweight, fit the wire t o the to wing ho ok on the counterweight a nd tow the machine.

When towing a mac hine, travel at a speed o f less th an 1 km /h for a distance of only a few meters to a place that is suitable for . in emergencies. carrying out repairs This is for use only