Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING outer element. CHECKING frequently during the cleaning operation. 4 - 25 Always wear prot ective glasses, dust mask, or o ther pr otective e quipment. When removing t he air cleaner elemen t from the air cle aner body , it is dangerous to pull it out by for When working at high places or where the foothold is p oor, be ca reful not to fall because of the reac tion when pulling out the If t he internal yello w piston overlaps th e red zone (A) on the o utside diameter of dust in dicator (1), clean t he air cleaner e lement.

After cleaning, pre ss the reset button to reset the pi NOTICE Do not clean the e lement until the yellow piston in dust indicator (1) e (A) on the outer diameter. eaned frequently before the yellow piston in dust Do overlaps the red zon e (A) on the outer dia meter If the element is cl eaned frequently be indicator (1) overlap will not be able to s the red zone (A) on the outer diameter, the air cleaner provide its expected performance and the cleaning e poor. leaner aning efficiency will becom In addition, dirt stuck to the element will dr op inside the inner element more