. MAINTENANCE SERVICE PROCEDURE CLEAN AND CHECK RADIATOR FINS, OIL COOLER FINS, AFTERCOOLER FINS CLEANING BY ROTATING COOLING FAN IN REVERSE DIRECTION WARNING switch (2) to the cleaning (CLN) 4 - 37 Carry ou t this procedure if th ere is any mud or d irt stuck to the REMARK Check th e hydraulic cooler h oses. If any hose is cracked or hardened by age, replace with a new hose. Also check and tight en all loose hose cl When clea ning the cooling fan b y turning it in the rever se direction, mak e sure that the parking brake leve r is in the LOCK position. NOTICE ting the cooling fan in the reverse direction, be extremely careful of flying dust.
he right and left engine side covers and check that no dust and dirt are accumulated inside the engine room. When rota ting the cooling fan i n the reverse direction, be extremely ca Open up t he right and left engin e side covers and che ck that no dust a nd dirt are accumulated inside t When the fan reversal lamp is lig hted and the fan is turn ing in the reverse direction, the machine does not move even if the steering - forward and reverse - gearshift lever is operated to an y of the forward, reverse and steering positions. This function is designed to protect the radiator.
When sto pping the engine when the cooling fan is rota ting in the revers e direction, first run the engine at low idling, then stop it. The dust and dirt stuck to the radiator and cooler can be blown ou t by rotating the cooling fan i n the reverse direction. 1. Turn starting engi 2. Turn starting switch (1) t o the "ON" position. 3. Turn posit Fan reversal lamp (3) lig