. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE REMARK flashes, telling engine. The cooling fan begins to turn in the normal direction. REMARK dirt is caught in the radiator fins, blow with compressed air to clean. 4 - 38 Even if the fan rota tion selector switch is turned whi running, the fan do Then fan rotation es not change its r selection impossibi you that the fan rot ation cannot be sw itched. 4. Start up the en gine by turning eng ine starting s witch key The cooling fa n begins to turn in t he reverse di 5. Run the engine Select the time for running the en gine at high i dle as follo ws according to t he c ondition of Normal cloggin g:
1 to 2 minutes Excessive clog ging: 2 to 3 minute 6. After completin g the cleaning, run the engine a t low idle f or approx. 10 second 7. Turn starting s witch (1) to the "OF F" position a nd stop th e engine. REMARK When the cooling f an is turning for cle aning, power cannot be switched off immediately, even if the engine starting switch key is turne d to the OFF positi on in order to protect th e hydraulic circui t. 8. Turn starting s witch (1) to the "ON " position. s unlighted a nd start up the 9. Check that fan reversal lamp (3) i p the I f