Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE, CLEAN DAMPER BREATHER WARNING 4 - 75 The oil is a t high temperat ure immediately after the machine h as been operated.Wait for the oil to cool down before carrying out maintenance The undercover i s heavy. D o not go directly under t he cover when opening or closing it. When remo ving bolts (4), carry out the operation a t the rear of the point im mediately unde r the cover so that it is possible to escape at a Refill capacity: 1.5 liters (0.40 U S gal) 1. Ope n th e engine side cover (1 ) at the left of the machine ; you can see gaug 2. Remove the u ndercov er (2) at t he bottom rea r of the chassis as follows.

1) Remove 2 bolts (3 ) toward the front of th e chassis