DDEC VI SYSTEM From these data, quantity and timing of injection are calculated. NOTE: To obtain a replacement MCM, all the data given on the MCM label are required. The MCM data label has the 10 digit engine serial number (see Figure 13). Figure 14 CPC The CPC receives data from the following sources: Figure 13 MCM Label The operator (accelerator pedal position, engine brake switch) Common Powertrain Controller Other electronic control units (for example, the anti-lock brake system) The CPC communicates with any other MCM unit installed on the vehicle over the J1939 data link. See Figure 14.
The MCM (oil pressure and coolant temperature) From these data, instructions are computed for controlling the engine and transmitted to the CPC via the proprietary datalink. Data for specific applications is stored in the CPC. These include idle speed, maximum running speed, and speed limitation. 34 All information subject to change without notice. DDC-SVC-MAN-0006 Copyright © 2009 DETROIT DIESEL CORPORATION