. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE becomes 0 mm. If the or replaced. Please WHEN LOOSENING TENSION WARNING except the procedure given below. If the track tension is not 4 - 28 4. Continu tension is still loose, the pins be eithe worn, s o they must r turned contact your K omats u distribut s are ex cessively It is extremel by relieved by th is procedure, please con tact your K omatsu distri 1. Loosen plug (1 ) gradually to re lease the grease. urn. 2. When lo osenin g plug (1), turn it a maximum of one t 3. If t he gr ease d oes no t come o ut smoothly, move the machine forward s and b ackwards a sho 4. Tighten plug ( 5.
To chec k that t he correct tensio n has been a chieved, move the machine backwards and forwa rds. 6. Check t he trac k tension again, and if the tension is n ot correct, adjust it again. NOTICE The safety label i s stuck on the bac k of cover (3), so be ca reful not to damage th e safet y label. , be careful not to let any dirt or soil get in. Whe n removing c over (3) , be carefu l not to let any dirt or so