. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING D65PX,WX: (each) 27 liters (7.13US gal) (PAGE 4-58)". 4 - 80 The oil is at high te mperature immediately after the machine has been operated. Wait for the oil to cool down before starting the operation. If there is still press ure remaining inside the ca se, the oil or p lug may f ly out. Loosen the plug slo wly to release the pressure. D65EX : (each) 1. Stop the machin e so that drain plug (3) is d irectly at the bottom. 2. Remove oil leve l plug (2) and oil filler pl drain plugs (3) a nd (4), and drain the oil. 3. After draining th e oil, install drain plugs (3 4.
Add oil to the sp ecified level through the h ole in oil filler plug (1). Check that the oil is at the specified le vel. For details see