. MAINTENANCE SERVICE PROCEDURE EVERY 2000 HOURS SERVICE CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT AND CLEAN HYDRAULIC TANK STRAINER WARNING 4 - 82 Maintenance for e very 50, 250, 500 an d 1000 hours serv ice should be carried out at the same time. Immediately after the engine is stopped, the parts and the oi l are at a high te mperature. Wai t for the t emperature to go down before starting th When the cap of t he oil filler port is rem oved, oil may spurt o ut, so turn the cap sl owly to re lease the internal pressure , then remove it carefull Refill capacity: 55 liters (14.53 US g 1. Lower the wor k equipment to the gr ound, then stop th e engine. 2.
Turn the cap o f oil filler port (F) at t he top of the hydra ulic tank slowly to relea se the internal press ure, then remove the cap. 3. Remove the c over (1) at the bottom of the hydraulic t 4. again, then ins tall cover (1). When l oosening drain val ve (2), be careful not to g