Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE METHOD OF RELEASING PRESSURE IN HYDRAULIC CIRCUIT NOTICE from the circuit, lever to the to each (a) (b) (c) (d) (A) (B) RAISE HOLD LOWER FLOAT RIGHT TILT LEFT TILT 4 - 87 Finish the s teps o f operating the blade contr ol lever to the front and back, and to the r ight and left, t o each stroke end within 15 seconds af ter the engine has stopped. After t he engine stops, pressure inside the accumulator begin s to gradually go down, so the pressur e cannot b e released excep t right after the engine stops. 1. Lower the w ork equipme nt an d stop the engine. 2. Turn t he startin g switch t o the ON p osition 3.

Set th e wor k equipment l ock l ever to the FREE position. 4. Opera te the blade control leve r fully to the front, rear, left , and right t o release the pressure fr om th e hydraulic circuit elease opera te the contro stroke end. hydrauli ight an left 5. Set th e wor k equipment l ock l ever to the LOCK position.