Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 04 FUEL SYSTEM Subsection 03 (FUEL TANK AND FUEL PUMP) Set the vacuum/pressure pump to vacuum. smr2009-031-012_a 1. Pressure selected smr2009-031-013_a 1. Vacuum selected Squeeze the vacuum/pressure pump handle sev- eral times to pressurize air to the inlet valve. Install a SMALL HOSE PINCHER (P/N 295 000 076) near outlet valve. 295000076 Connect vacuum/pressure pump to the vent hose end. smr2009-031-015_b TEST SETUP Valve should hold 34.5 kPa (5 PSI) without leak- age. Otherwise, replace inlet valve. When replacing valve, always reinstall it with the black side as shown.

smr2009-031-015_a TEST SETUP Squeeze the vacuum/pressure pump handle sev- eral times to draw air in through the inlet valve. Air should be drawn in freely and vacuum pres- sure indication on gauge should remain at zero. If vacuum value rises, replace inlet valve. Set vacuum/pressure pump to pressure. smr2006-026-004 Reinstall valve in its grommet. Reinstall remaining removed components. smr2009-031 261