Section 04 FUEL SYSTEM Subsection 03 (FUEL TANK AND FUEL PUMP) Align the fuel pressure regulator tabs into the pump reservoir cover and turn it counterclock- wise until it locks properly. smr2008-022-026_a 1. Fuel level sensor release tabs 2. Locking pins smr2008-022-025_b PRESSURE REGULATOR INSERTION INTO PUMP RESERVOIR COVER 1. Pressure regulator alignment tabs 2. Fuel pump reservoir alignment tabs smr2008-022-027_a 1. Pull up on fuel level sensor Fuel Level Sensor Installation Installation is the reverse of the removal proce- dure however, pay attention to the following. Ensure fuel level sensor locking pins are properly engaged into the fuel pump reservoir.
smr2008-022-030_a TAB UP WHEN PRESSURE REGULATOR PROPERLY LOCKED 1. Pressure regulator locking tab Reconnect the ground wire onto the pressure reg- ulator. smr2008-022-026_b 1. Ensure engagement of sensor locking pins smr2008-022-031_a 1. Pressure regulator ground wire installed smr2009-031 275