Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 04 FUEL SYSTEM Subsection 03 (FUEL TANK AND FUEL PUMP) Once the pressure regulator is rotate over the locking tab, pull up on it to remove it from the pump reservoir cover. smr2008-022-022_a 1. Pressure regulator 2. Ground wire contact on pressure regulator 3. Ground wire disconnected Using a flat screwdriver, press down on the lock- ing tab just below the pressure regulator to re- lease it from the pump reservoir cover, and rotate it clockwise simultaneously so that it slips over the locking tab. smr2008-022-025_a 1. Pressure regulator alignment tabs 2. Fuel pump reservoir alignment tabs NOTE:

The pressure regulator cover must not be removed from the pressure regulator housing as- sembly. smr2008 022-023_a 1. Pressure regulator 2. Pressure regulator locking tab smr2008-022-028_a 1. Do not remove pressure regulator cover at locking tabs 2. Pressure regulator cover 3. Pressure regulator housing Push in on the release tabs at the top of the fuel level sensor to unlock it from the fuel pump reser- voir housing, and simultaneously pull up on the fuel level sensor to remove it. smr2008-022-024_a 1. Pressure regulator locking tab 2. Pressure regulator rotated clockwise over locking tab 274 smr2009-031