Section 05 ELECTRICAL SYSTEM Subsection 01 (CONTROLLER AREA NETWORK (CAN)) TROUBLESHOOTING DIAGNOSTIC TIPS Check the fault codes using B.U.D.S. software as a first troubleshooting step. Refer to MONITORING SYSTEM/FAULT CODES section. CAN Communication Problems The following chart gives some symptoms and behaviors relative to the CAN component in cause. The list is not exhaustive, only the most significant items are given to help troubleshooting. 278 smr2009-048 CAN FAULTY WIRES (NO COMMUNICATION) VEHICLE BEHAVIOR OR OBSERVATION IN INFORMATION CENTER OBSERVATION IN B.U.D.S. Short circuit in CAN wires Engine is set to limp home mode. iBR gate will not move. "Locked" in neutral.
iBR light is ON. Check engine light is ON. B.U.D.S. will not be able to communicate with any electronic module. No vehicle detected message will be displayed in B.U.D.S. Information center (cluster) Check engine light is ON. iBR light is ON. Some functions not displayed such as: iS, VTS, RPM. 3 modules instead of 4 will be active. "Cluster" tab and its data will not be present. ECM, iBR and iS will report a cluster CAN problem. ECM (Engine Control Module) Engine is set to limp home mode. Check engine light is ON. iBR light is ON. iBR gate "locked" in neutral. Some functions not displayed such as: engine hours, RPM. 3 modules instead of 4 will be active.
ECM tab and its data will not be present. iBR and iS will report an ECM CAN problem. iBR (intelligent Brake and Reverse) Engine is set to limp home mode. iBR gate will not move. "Locked" in neutral. iBR light is ON. Check engine light is ON. Some functions not displayed such as: Lake water temperature, no VTS, no F,N,R indication. 3 modules instead of 4 will be active. iBR tab and its data will not be present. ECM and iS will report an iBR CAN problem. iS (intelligent Suspension) iS handlebar controls have no effect. No DOCK mode. Suspension will remain to its last position before the CAN problem. iS position is not displayed. 3 modules instead of 4 will be active.
iS tab and its data will not be present. Depth sounder The menu Depth Sounder Indicator will not be visible. The Depth menu will not be available. Nothing will be observable. Diagnostic connector Nothing will be observable. B.U.D.S. will not be able to communicate with any electronic module. No vehicle detected message will be displayed in B.U.D.S.