Section 05 ELECTRICAL SYSTEM Subsection 03 (IGNITION SYSTEM) the spark plug at prescribed intervals, examining the plug face (i.e. the part of the plug projecting into the combustion chamber). Spark Plug Installation Prior to installation, ensure the contact surfaces of the cylinder head and spark plug are free of grime. 1. Using a wire feeler gauge, set electrode gap as specified in the following chart. 2. Apply anti-seize lubricant over the spark plug threads to prevent possible seizure. 3. Hand screw spark plug into cylinder head. Then, tighten the spark plug clockwise an ad- ditional 1/4 turn with an approved spark plug socket. Install ignition coil.
Refer to IGNITION COIL IN- STALLATION in this subsection. Complete the installation in the reverse order of the removal. smr2009-032 295 ENGINE SPARK PLUG TORQUE GAP mm (in) 1503 NGK DCPR8E Hand tighten + 1/4 turn with a socket 0.75 (.030)