Section 05 ELECTRICAL SYSTEM Subsection 07 (GAUGE) A single segment of a bar gauge type indicator is turned on to indicate the relative position of the watercraft bow. pears and a single segment of the bar gauge is turned on to indicate the position of the suspen- sion. Refer to SUSPENSION (iS) for more details. 8) Numerical Display A numerical display is used to provide a variety of indications as selected by the operator: Engine RPM Watercraft speed Lake temperature Water depth (GTX LTD iS). smo2009-002-114_l VTS POSITION INDICATION Refer to IBR AND VTS subsection for more de- tails.
7) iS Position The iS position display (intelligent Suspension) provides a visual indication of the relative height of the suspension. It also indicates if the suspension is in AUTO mode of operation. smo2009-002-114_n EXAMPLE - NUMERICAL DISPLAY 1. Water depth indication (GTX LTD iS) 2. Numerical display When the information center is first powered up, the numerical display defaults to the last selected indication. The numerical display is also used to display vari- ous system mode settings such as: VTS PRESET LEARNING KEY setting RENTAL KEY setting SLOW SPEED MODE setting.
Changing Numerical Display Indication To change the indication in the numerical display, press the MODE button on the RH handlebar re- peatedly until DISPLAY is visible in the multifunc- tion display. smo2009-002-114_m 1. iS position indicator 2. iS AUTO mode indicator When the suspension system is operating in AUTO mode, the AUTO indicator and all bar seg- ments of the position indicator will be on. When the suspension height is adjusted manually using the iS , the system switches to MANUAL mode of operation. The AUTO indication disap- smr2009-036 337