Section 05 ELECTRICAL SYSTEM Subsection 07 (GAUGE) smr2009-036-003_a GAUGE CONNECTOR PIN-OUT smr2009-027-010_f TYPICAL - CONTACT COORDINATES (FRONT VIEW FB2) Repair wiring and connectors as required. Information Center Removal 1. Open the front cover. 2. Move the steering to its highest position, refer to BODY subsection. 3. Using a long flat screwdriver, insert the blade between the lower locking tabs (one each side) of the gauge support cover, and carefully pry the tabs outwards to release them from the gauge support. smr2009-036-005_b 12 PIN STEERING CONNECTOR PIN-OUT (STEERING SIDE) A. Male connector alignment keyways smr2009-042-001_a 1. Long flat screwdriver 2. Locking tab 3.
Gauge support cover smr2009-036-005_a 12 PIN STEERING CONNECTOR PIN-OUT (VEHICLE SIDE) A. Female connector alignment keys 4. Pull the bottom of the panel outwards to re- move it from the gauge support. smr2009-036 349