Section 05 ELECTRICAL SYSTEM Subsection 07 (GAUGE) 6. Install the diagnostic connector in its holder. 7. Carry out the following procedure: TESTING DEPTH SOUNDER OPERATION. Testing Depth Sounder Operation 1. Press START/STOP button. 2. Install the D.E.S.S. key on the D.E.S.S. post. 3. Check information center to confirm depth sounder operation. The depth sounder icon is visible in the information center when the depth sounder is detected. ssi2009-002-018_a 1. Depth sounder icon 4. Reinstall all other removed parts. 5. Launch watercraft in water and check depth sounder operation. Refer to INFORMATION CENTER for instructions on how to select the DEPTH indication in numerical display.
WARNING Never use the depth gauge as a warning de- vice to ride in shallow water. Use it as a nav- igation guide only. Not to be used to get pre- cise navigation data. smr2009-036 357