Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 06 STEERING AND PROPULSION Subsection 02 (iBR AND VTS) GENERAL During assembly/installation, use torque values and service products as indicated in the exploded view. Clean threads before applying a threadlocker. Re- fer to SELF-LOCKING FASTENERS and LOCTITE APPLICATION at the beginning of this manual for complete procedure. WARNING Torque wrench tightening specifications must be strictly adhered to. Locking devices (e.g.: locking tabs, elastic stop nuts, self-locking fasteners, cotter pins, etc.) must be replaced with new ones. sdd2009-001-039_b 1. iBR gate 2. iBR module and motor 3. Jet pump When the iBR lever is pulled in, it operates the brake and reverse lever sensor (BRLS).

It is a dou- ble output hall effect sensor. The redundancy is used for security purposes. Hoses, cables or locking ties removed during a procedure must be reinstalled as per factory stan- dards. SYSTEM DESCRIPTION (iBR) This watercraft uses an electronically controlled braking and reverse system called the iBR system (intelligent Brake and Reverse). The iBR module controls the position of the iBR gate to provide forward thrust, reverse thrust, braking thrust, and neutral. The operator commands the position of the iBR gate using either the throttle lever for forward thrust, or the iBR lever for neutral, reverse, and for the braking function.

The iBR lever is located on the LH side of the han- dlebar. sdd2009-001-029_a 1. iBR lever 2. BRLS sensor The BRLS sends the signals to the iBR module. The iBR module controls an electric motor that in turn raises or lowers the iBR gate through a me- chanical drive unit. NOTE: The iBR gate will move when commanded by the iBR lever only if the engine is running. For maintenance purposes, the iBR OVERRIDE func- tion available through the gauge can be used to electrically move the gate to the desired position. The iBR module is programmed with various pa- rameters that it compares to the input signals and information it obtains through the CAN bus from the other electronic modules.

Depending on vehicle speed and how far the iBR lever is depressed, the iBR module will automat- ically adjust the iBR gate movement speed and stroke. sdd2009-001-036_a 1. iBR lever (intelligent Brake and Reverse) smr2009-037 375