Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 06 STEERING AND PROPULSION Subsection 02 (iBR AND VTS) smr2009-038-029_a 1. iBR position indication 2. Press and hold the VTS UP button on the LH handlebar to position the iBR to the full up po- sition and look for the iBR Motor Current indi- cation in B.U.D.S. Also look for a change of iBR Position (Deg) indication. NOTE: Current draw indication will not be stable. High and low peaks will be observed. Look for the maximum average current draw. smr2009-038-028_a 1. Read Data 2. Activation page tab 3. iBR tab 6. Select the iBR UP and iBR DOWN s alternately and look for a change in iBR Position (Deg) . smr2009-038-028_b 1. iBR UP/DOWN s 2.

iBR position indication smr2009-038-032_b Step 1: Note iBR current draw Step 2: Note iBR position indication change If the iBR moves using these s but does not move using the iBR lever, refer to BRLS VOLTAGE TEST in this subsection. If the iBR does not move, check the iBR fuse in FB2. If fuse is good, refer to iBR ACTUATOR IN- PUT VOLTAGE TEST in this subsection. 3. Press and hold the VTS DOWN button and look for the iBR Motor Current draw indication. Also look for a change of iBR Position (Deg) indication. iBR Actuator Motor Current Test Using B.U.D.S. 1. On the iBR activation page in B.U.D.S., note the iBR Position (Deg) indication. 388 smr2009-037