Section 02 ENGINE Subsection 01 (ENGINE REMOVAL AND INSTALLATION) When alignment and longitudinal position of en- gine are correct, tighten engine mount screws. Refer to ENGINE MOUNTS in this subsection. Recheck engine alignment. ENGINE MOUNTS If engine mounts have been removed, apply LOC- TITE 243 (BLUE) (P/N 293 800 060) on screw threads or use new screws with self-locking product. Torque all engine mount screws to 25 N•m (18 lbf•ft). smr2009-016-033_a 1. Torque to 25 N•m (18 lbf•ft) 2. Position conical spring washer with its concave side towards hull smr2009-016 23