Section 07 BODY AND HULL Subsection 02 (BODY) 3. Install the new mirror and tighten wing nut. 3.1 The mirror adjustment is correct when the spring length is between 10 mm and 12 mm (13/32 in and 15/32 in). smr2009-042-031_a 1. Lower attachment in its cavity Close cover to lock the bottom of the gas shock. MIRRORS Mirror Replacement 1. Remove the mirror trim. 1.1 Using a small screwdriver, unlock both front tabs securing the front of mirror trim. 1.2 Tilt the trim forward and remove it. smr2009-042-041_a A. 10 mm to 12 mm (13/32 in to 15/32 in) 4. Install the mirror trim. 4.1 Install the front locating tabs. smr2009-042-043_a 1. Front locating tabs smr2009-042-042_a 1. Front retaining tabs 2.
Side retaining tabs 3. Locating tabs 4.2 Down the rear part of trim. Lift up the rear edge and press the center of trim to posi- tion retainers over front retaining tabs. 2. Unscrew wing nut and spring securing mirror. smr2009-042-044_a 1. Trim retainers 2. Retaining tabs smr2009-042-040_a 1. Wing nut 2. Spring 3. Mirror smr2009-042 477