Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 07 BODY AND HULL Subsection 02 (BODY) STORAGE COMPARTMENT COVER smr2009-042-029_a 1. Cover hinge key 2. Front body module slot smr2009-042-024_a 1. Storage compartment cover Storage Compartment Cover Installation The installation is the reverse of the removal pro- cedure. However, pay attention to the following. Remove gas shock attachment from cover. Apply LOCTITE 243 (BLUE) (P/N 293 800 060) on threads of shock absorber body. Tighten manually the attachment on gas shock. Install the bellows and secure it using a locking tie. Install the gas shock on cover. NOTE: The corrugated section of bellows must pointed downward. Storage Compartment Cover Removal 1. Open cover. 2.

Cut locking tie retaining the bellows of gas shock. smr2009-042-028_a 1. Cut this locking tie 3. Move bellows downward. 4. Unscrew gas shock from its upper attachment. 5. Remove gas shock from vehicle. 6. Open cover completely. 7. Align cover hinge keys with front body module slots. 8. Pull up cover to remove it. smr2009-042-030_a 1. Corrugated section Install cover on vehicle. NOTICE Make sure to insert cover hinges completely. A click must be heard to indicate complete insertion. Position the gas shock lower attachment on cavity opening. NOTICE To avoid breaking the attachment, do not force to insert it in cavity. 476 smr2009-042