Section 07 BODY AND HULL Subsection 02 (BODY) smr2009-042-036_a 1. Retaining screws 4. Remove the Speed-Tie unit from vehicle. ssi2009-003-010_a 1. Rear locking tab Front Speed-Tie Unit Installation 1. Ensure both double cage nuts are correctly in- serted into Speed-Tie unit cavities. 13. Lightly pull the top of LH trim and remove the reel of the Speed-Tie unit from its location as shown. ssi2009-003-007_a 1. Double cage nut 2. Positioning tab ssi2009-003-011_a 1. Speed-Tie unit reel 2. Insert the Speed-Tie unit in vehicle. 2.1 Unlock the front tab securing the LH trim. NOTICE During Speed-Tie unit removal, be careful not to damage the LH trim. Rear Speed-Tie Unit Removal 1.
Remove screws securing the Speed-Tie unit to the boarding platform. 2. Remove rear trim by releasing retaining tabs. ssi2009-003-009_a 1. Front locking tab 2.2 Unlatch the rear tab. smr2009-042-035_a 1. Retaining tabs 3. Remove screws securing the locking mecha- nism to the boarding platform. 486 smr2009-042