Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 07 BODY AND HULL Subsection 02 (BODY) ssi2009-003-003_a 1. Upper trim smr2009-042-034_a 1. Retaining tabs 4. Remove the plastic push-in clip retaining the LH trim. 7. Using a small screwdriver, release both retain- ing hooks securing the cam trim on locking mechanism. ssi2009-003-004_a 1. Remove this plastic push-in clip ssi2009-003-015_a 1. Retaining hooks 5. Open seat and using the SUPERTITANIUM DRILL BIT 3/16" (P/N 529 031 800) , drill the rivet securing the LH body cover and the seat trim. 8. Remove the four screws retaining the Speed- Tie unit. 9. Position the reel of Speed-Tie unit to the bottom of its cavity. 10. Remove the locking mechanism from vehicle. 11.

Open storage cover and unlock the front tab securing the LH trim. 529031800 ssi2009-003-008_a 1. LH body cover 2. Remove this rivet 3. Seat trim 6. Remove front trim by releasing both retaining tabs. ssi2009-003-009_a 1. Front locking tab 12. Unlatch the rear tab. smr2009-042 485