Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 07 BODY AND HULL Subsection 02 (BODY) ssi2009-003-109_a 1. Tabs 2. Alignment pin ssi2009-003-105_a 1. Speed-Tie unit 12.2 Press trim in place. 13. Test Speed-Tie operation. 9. Close boarding platform. 10. Tighten tapered screws securing the lock- ing mechanism to 2.5 N•m ± 0.5 N•m (22 lbf• in ± 4 lbf• in ). Speed-Tie Unit Cleaning A minimum of maintenance is required to keep the Speed-Tie unit and the rope in serviceable con- dition. Clean the locking mechanism and rope with fresh water to remove salt, sand or other deposits. NOTICE Do not use a high pressure washer to clean the Speed-Tie unit. Let dry. Speed-Tie Rope Replacement 1. Remove the Speed-Tie unit from the vehicle. 2.

Using a small tool, remove the rope cap. ssi2009-003-106_a 1. Boarding platform 2. Locking mechanism 11. Install the cam trim. 11.1 Insert both cam trim retaining hooks into locking mechanism openings. ssi2009-003-017_a 1. cap 2. Small screwdriver ssi2009-003-107_a 1. Retaining hooks 3. Untie the knot and remove the button. 11.2 Press down the cam trim against board- ing platform. 12. Install the rear trim. 12.1 Align tabs and alignment pin with corre- sponding openings. smr2009-042 489