Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 09 WIRING DIAGRAM Subsection 02 (CONNECTOR INFORMATION) ECM Connector Probing The most recommended and safest method to probe ECM connector terminals is to use the ECM ADAPTER TOOL (P/N 529 036 166) . This tool will prevent deforming or enlarging terminals which would lead to bad ECM terminal contact creating intermittent or permanent problems. 529036175 Remove rear protector from connector. Pull out the connector lock. 529036166 Disconnect the desired ECM connector and re- connect on the probing tool. Probe required terminals directly in the tool holes. smr2009-045-025_a Insert tool to unlock terminal. vmr2008-139-016_a TYPICAL 1. ECM connector 2.

ECM adapter NOTICE Never probe directly on ECM har- ness connector. This could change the shape or enlarge the terminals and create intermit- tent or permanent contact problems. ECM Terminal Removal (Harness Connector) To remove a signal terminal from ECM harness connector, use the ECM TERMINAL REMOVER 2.25 (P/N 529 036 175) . To remove a power terminal, use the ECM TERMINAL REMOVER 3.36 (P/N 529 036 174) . smr2009-045-026_a 1. Unlock here smr2009-044 523