Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 02 ENGINE Subsection 04 (SUPERCHARGER) 529035950 smr2006-012-032_a 1. Compressor shaft 2. Ball bearing 3. Supercharger housing half 4. Thrust washer 5. Distance sleeve 1. Support plate 2. Bearing support/pusher 3. Protrusion here NOTICE Before pressing in the supercharger shaft, be sure to properly support the inner race of ball bearing in supercharger housing half with the recommended tool. This way, the installation pressure will be applied to the inner race and will not be transmitted to the bearing balls which would otherwise shorten the bearing life. 10. Apply heat outside of the housing with a heat gun to expand its diameter prior to inserting the shaft.

Ensure there is no O-ring on the housing half prior to heating. 11. Apply engine oil on supercharger shaft. Press shaft with thrust washer and distance sleeve together in supercharger housing half. ! 1. Supercharger shaft 2. Distance sleeve 12. Apply engine oil on seal and push into retaining disc by hand. NOTE: Always use a NEW oil seal when assem- bling the supercharger. 1. Oil seal smr2009-020 49