0A-30 General Information 1 2 3 4 5 MFW90ASH000401 Legend 1. Tech2 2. Battery power cable 3. 3 A fuse 4. Clip (black) 5. Clip (red) If the power supply is not input, check the 3 A fuse. 7. Turn the ignition "ON", and press the "PWR" key of the Tech2. 8. Confirm the display of the Tech2. Press (ENTER) To Continue HCW46ESH001901 CAUTION: Remove/install the PCMCIA card after confirming that power is not being supplied to the Tech2.