Encoder diagnostics | Diagnosis for encoders with TTL/HTL/HTLs/ interface 8 Signal amplitude In the bar graph of the signal amplitude, the position of the black bar indicates the incremental signal. The farther the black bar moves to the right, the larger the value of the signal amplitude is. Figure 43: Signal amplitude TTL (distance between graduation lines: 1 μ App) Depiction Description Optimum signal amplitude Minimum signal amplitude Maximum signal amplitude Signal amplitude in oscilloscope display The graphic below shows an oscilloscope display of the signal amplitude. The oscilloscope display is not a function of the product and is intended only as an explanation. Figure 44:
Oscilloscope display of signal amplitude Signal deviations Signal deviations are caused by asymmetry, signal ratio and phase angle. The larger the signal deviation is, the broader the black bar becomes. The signal deviation is optimal when the black bar is as narrow as possible within the green area. The signal deviation is too high if the black bar exceeds the yellow area. Figure 45: Bar graph of signal deviation Depiction Description Optimum signal deviation Signal deviation at the tolerance limit Signal deviation too large 104 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024