heidenhain PWT 100, PWT 101 — 13.3 Troubleshooting

What to do if ... | Overview 13 13.1 Overview This chapter describes the causes of faults or malfunctions of the product and the appropriate corrective actions. 13.2 Malfunctions If faults or malfunctions that are not listed in the "Troubleshooting" table below occur during operation, refer to the machine tool builder's documentation or contact a HEIDENHAIN service agency. 13.3 Troubleshooting Faults or malfunctions that occur after the product has been switched on and while it is being used are displayed in the Encoder status screen of the product. Further information:

"Encoder status screen ", Page 95 Faults or malfunctions that may occur before or during switch-on of the product are listed in the following table. DANGER Serious personal injury or death by electric shock! Any work on line voltage that is performed by personnel without the necessary qualification may result in serious personal injury or death. The working steps listed in the following table must be performed only by personnel with the qualification specified in the table. 150 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024