heidenhain PWT 100, PWT 101 — 13.3 Troubleshooting

13 What to do if ... | Troubleshooting Fault Cause of fault Correction of fault Personnel No supply voltage Check the power connection Service technician The status LED on the wall adapter power supply remains dark after connecting the product to the power outlet. The product does not function properly Contact a HEIDENHAIN service agency Service technician Service technician The status LED on the wall adapter power supply shines after connecting the product to the power outlet, but the display of the product remains dark.

The product does not function properly The connection between the wall adapter power supply and the product is inter- rupted Check the wall adapter power supply and the connecting cable of the product for correct connections Contact a HEIDENHAIN service agency Service technician Display remains empty A software error occurred when the product was started Switch the product off and then on again Remove the MicroSD memory card before switch-on If the fault recurs, contact a HEIDENHAIN service agency Service technician After startup, the product does not recog- nize any entries made on the touchscreen.

Hardware initial- ization is faulty Switch the product off and then on again Service technician HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024 151