Installation | Connecting the product 5 5.4 Connecting the product DANGER Risk of electric shock! Improper grounding of electrical devices may result in serious personal injury or death. Use only the wall adapter power supply included in delivery or a unit that has been certified by the manufacturer WARNING Danger of fire! Use of wall adapter power supplies that do not meet the minimum requirements! Use only wall adapter power supplies that fulfill or exceed the specified minimum requirements.
Connect the functional ground of the product with the corresponding connection of the system (R Select the correct adapter for your power supply system from the items supplied Place the adapter onto the wall adapter power supply and slide it into the power supply until a click is heard and the adapter is locked in place Connect the connector of the wall adapter power supply to connection X3 on the left side panel of the product Connect the wall adapter power supply to the power outlet The line voltage is connected, and the device is ready for operation.
Replacing the adapter Disconnect the wall adapter power supply from line power and from the product Press and hold the button on the bottom side of the wall adapter power supply Remove the old adapter by sliding it away from the wall adapter power supply and pulling it off Place the new adapter onto the wall adapter power supply and slide it into the power supply until a click is heard and the adapter is locked in place Pin layout of X3 32 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024 2 1 1 2 DC 24 V GND