8 Encoder diagnostics | Diagnostics for encoders with 1 V PP /11 µA PP /1 V PP + Z1 interface Signal deviations Signal deviations are caused by asymmetry, signal ratio and phase angle. The larger the signal deviation is, the broader the black bar becomes. The signal deviation is optimal when the black bar is as narrow as possible within the green area. The signal deviation is too high if the black bar exceeds the yellow area. Figure 23:
Bar graph of signal deviation Depiction Description Optimum signal deviation Signal deviation at the tolerance limit Signal deviation too large Signal deviation in oscilloscope display The table below explains the signal amplitude in the oscilloscope displays. The oscilloscope display is not a function of the product and is intended only as an explanation. Depiction Description Optimum signal deviation Signal deviation at the tolerance limit Signal deviation too large HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024 81