Warnings and Cautions - Section 22 OM2209 Page 22-2 A plate attached to the right rear corner of the cab states the Rollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) meets various SAE performance requirements. ! WARNING ! Do not make modifications to this structure, or attempt to repair damage without written approval from Komatsu. Unauthorized repairs will void certification. Danger plates are mounted on each suspension and accumulator cylinder. These plates warn that the suspensions and accumulators are charged with high pressure nitrogen.
No servicing of any kind should be attempted until the service manual has been refer- enced and proper and safe procedures are followed. Warning plates are attached to both the hydraulic tank and fuel tank to alert technicians not to work on the truck with the body in the raised position unless body-up retention cable is in position.